Since they are in reality powerful computers, it is
difficult to convey Rocky Mountain Instrument's product features in published
advertising, including our web pages. For those of you that would like complete
information, the following manuals in Adobe PDF format may be viewed online or
downloaded and printed to get a complete picture of the capabilities of the
microEncoder and microMonitor.
For those of you who are interested in the RS232 standard serial output (airdata) formats of the microEncoder, you will find detailed information in one of the appendices of the microEncoder Programming Manual.
For those of you who are interested in the RS232 serial output format of the microMonitor, both with and without the microEncoder input, you will find detailed information in one of the appendices of the microMonitor Programming manual.
Note that until version 6.00 of the microMonitor, there was no programming manual… all programming details were contained in the operations manual.
If you don't have one, here is a FREE Adobe Acrobat PDF file viewer.
µEncoder Manuals |
|||
eoperate1200 |
microEncoder Operations Manual |
01/01/2004 |
Current Version |
eprogram1200 |
microEncoder Programming Manual |
10/01/2002 |
Current Version |
einstall1200 |
microEncoder Install Manual |
01/01/2004 |
Current Version |
eassy1200 |
microEncoder Assembly Manual |
01/01/2004 |
Current Version |
All current microEncoder manuals (except assembly) can be used for earlier versions. Typically, if a feature described in the operations or programming manual is absent in your unit, just disregard that feature.
µMonitor Manuals |
|||
moperate600 |
microMonitor Operations Manual |
02/25/2008 |
Current Version |
moperate500 |
microMonitor Operations Manual |
05/18/2003 |
See comments below table |
moperate401 |
microMonitor Operations Manual |
09/10/2002 |
See comments below table |
mprogram600 |
microMonitor Programming Manual |
02/25/2008 |
Current Version |
minstall600 |
microMonitor Install Manual |
02/25/2008 |
Current Version |
minstall500 |
microMonitor Install Manual |
06/10/1998 |
Covers many years |
massy600 |
microMonitor Assembly Manual |
04/01/2005 |
Current Version |
The version 500 installation manual covers many prior years as there have been few changes in the installation of the microMonitor. The two operations manuals in addition to the current version have one portion that is different, Programming Extra Features – function #6 (PEF). The version 500 manual software has codes for function #6 from 0 to 31. The version 401 manual PEF has codes from 0 to 15, but will suffice for earlier software versions that have 0 to 7 by dropping the last column in the selection table.
Miscellaneous Manuals & Instruction Sheets |
||
AMP Sensor Details |
Old-Style Amp Sensor Construction |
|
Compass Module Manual |
microEncoder Compass Option |
|
TwoFlow Module Manual |
For engines with fuel tank return |
|
Hall Effect Sensor Instruction Sheet |
Last resort if other tachometer inputs fail |
|
EGT/CHT Switch Instruction Sheet |
Wiring guide for EGT/CHT switch |
|
Magneto-Electronic Ignition Combo |
How to combine hybrid tachometer inputs |